{"id":1473161625623,"title":"BEP Easy Fit Battery Switch - 275A Continuous","handle":"bep-easy-fit-battery-switch-275a-continuous","description":"\u003cb\u003eEasy Fit Battery Switch - 275A Continuous\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3\/4\" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCan easily be retro-fitted in place of most European post and lever type switches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMolded in high temperature, fiber reinforced plastics\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTin-plated copper studs and nuts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIgnition-protected\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"%22https:\/\/productimageserver.com\/prop65\/6pt.png%22\" alt='\"Warning\"'\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"%22http:\/\/P65Warnings.ca.gov%22\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBEP EASY FIT BATTERY SWITCH 275A CONTINUOUS\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBEP MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e700\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e870216000169","published_at":"2019-01-24T20:53:05-06:00","created_at":"2018-10-25T18:28:26-05:00","vendor":"Bep Marine","type":"Electrical","tags":["Battery Management"],"price":3399,"price_min":3399,"price_max":3399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12835023421463,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW60031","requires_shipping":true,"taxable":true,"featured_image":{"id":4053999255575,"product_id":1473161625623,"position":1,"created_at":"2018-10-25T18:28:26-05:00","updated_at":"2018-11-12T08:49:59-06:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW60031.jpg?v=1542034199","variant_ids":[12835023421463]},"available":false,"name":"BEP Easy Fit Battery Switch - 275A Continuous","public_title":null,"options":["Default Title"],"price":3399,"weight":295,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8.70216E+11","featured_media":{"alt":null,"id":1427991625751,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW60031.jpg?v=1569270281"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW60031.jpg?v=1542034199"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW60031.jpg?v=1542034199","options":["Title"],"media":[{"alt":null,"id":1427991625751,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW60031.jpg?v=1569270281"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW60031.jpg?v=1569270281","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cb\u003eEasy Fit Battery Switch - 275A Continuous\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3\/4\" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCan easily be retro-fitted in place of most European post and lever type switches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMolded in high temperature, fiber reinforced plastics\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTin-plated copper studs and nuts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIgnition-protected\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"%22https:\/\/productimageserver.com\/prop65\/6pt.png%22\" alt='\"Warning\"'\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"%22http:\/\/P65Warnings.ca.gov%22\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBEP EASY FIT BATTERY SWITCH 275A CONTINUOUS\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBEP MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e700\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e870216000169"}

BEP Easy Fit Battery Switch - 275A Continuous

Product Description
Maximum quantity available reached.
Easy Fit Battery Switch - 275A Continuous

The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.

Features:
  • Can easily be retro-fitted in place of most European post and lever type switches
  • Molded in high temperature, fiber reinforced plastics
  • Tin-plated copper studs and nuts
  • Ignition-protected


"Warning"WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.


Product : BEP EASY FIT BATTERY SWITCH 275A CONTINUOUS
Manufacturer : BEP MARINE
Manufacturer Part No : 700
UPC : 870216000169