{"id":1473130201111,"title":"BEP Pro Installer 400A EZ-Mount Double Pole Battery Switch - MC10","handle":"bep-pro-installer-400a-ez-mount-double-pole-battery-switch-mc10","description":"\u003cb\u003ePro Installer 400A EZ-Mount Double Pole Battery Switch - MC10\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAn addition to our multi award winning Pro Installer EZ Mount range, this battery switch provides Double Pole On\/Off functionality so that both positive and negative battery terminals can be isolated. Most commonly used on metal hulled craft, full isolation ensures there is no risk of stray currents that may cause galvanic corrosion, and also guarantees optimum safety during servicing or mishap, for example with mining equipment. As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches \"cluster\" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTested to UL1107 ignition protection, CE\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTinned copper 10 mm (3\/8 in) studs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless steel washers and nuts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFiber reinforced plastics\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e400A Continuous \/ 600A 5 minutes Intermittent \/ 1500A 10 seconds Cranking \u003c\/li\u003e\n\u003cli\u003e(cable size to achieve ratings 120mm}, 4\/0, smaller cable size will reduce \u003c\/li\u003e\n\u003cli\u003ethe Amp rating)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWaterproof to IP67\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame interconnection height as Pro Installer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemovable knob allows isolation during servicing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 removable side plates for protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndustry standard 3.85 x 3.85 inch footprint\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSurface mount only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEach Pro Installer battery switch is fully tested for pressure sealing, \u003c\/li\u003e\n\u003cli\u003eRotation force and electrically load tested\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003eMounting: Surface Only\u003cbr\u003eVoltage: 48v DC (for 12-48v systems)\u003cbr\u003eRating: 400 Cont \/ 600 Inter \/ 1500 Crank\u003cbr\u003eDims: 3.85\" x 3.85\" x 3.62\"\u003cbr\u003eOperation: On\/Off\u003cbr\u003eStud: 4x 10 mm (3.8\") \u003cp\u003e\u003cimg src=\"%22https:\/\/productimageserver.com\/prop65\/6pt.png%22\" alt='\"Warning\"'\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"%22http:\/\/P65Warnings.ca.gov%22\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBEP PRO INSTALLER 400A EZMOUNT DOUBLE POLE BATTERY SWITCH\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBEP MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e770-DP-EZ\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e843687008569","published_at":"2019-01-24T20:54:45-06:00","created_at":"2018-10-25T18:05:13-05:00","vendor":"Bep Marine","type":"Electrical","tags":["Battery Management"],"price":7599,"price_min":7599,"price_max":7599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12834956771351,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW58587","requires_shipping":true,"taxable":true,"featured_image":{"id":4053960458263,"product_id":1473130201111,"position":1,"created_at":"2018-10-25T18:05:13-05:00","updated_at":"2018-11-12T08:55:19-06:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW58587.jpg?v=1542034519","variant_ids":[12834956771351]},"available":false,"name":"BEP Pro Installer 400A EZ-Mount Double Pole Battery Switch - MC10","public_title":null,"options":["Default Title"],"price":7599,"weight":544,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8.43687E+11","featured_media":{"alt":null,"id":1427963674647,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW58587.jpg?v=1569270276"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW58587.jpg?v=1542034519"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW58587.jpg?v=1542034519","options":["Title"],"media":[{"alt":null,"id":1427963674647,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW58587.jpg?v=1569270276"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1891\/9035\/products\/CW58587.jpg?v=1569270276","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cb\u003ePro Installer 400A EZ-Mount Double Pole Battery Switch - MC10\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAn addition to our multi award winning Pro Installer EZ Mount range, this battery switch provides Double Pole On\/Off functionality so that both positive and negative battery terminals can be isolated. Most commonly used on metal hulled craft, full isolation ensures there is no risk of stray currents that may cause galvanic corrosion, and also guarantees optimum safety during servicing or mishap, for example with mining equipment. As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches \"cluster\" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTested to UL1107 ignition protection, CE\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTinned copper 10 mm (3\/8 in) studs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless steel washers and nuts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFiber reinforced plastics\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e400A Continuous \/ 600A 5 minutes Intermittent \/ 1500A 10 seconds Cranking \u003c\/li\u003e\n\u003cli\u003e(cable size to achieve ratings 120mm}, 4\/0, smaller cable size will reduce \u003c\/li\u003e\n\u003cli\u003ethe Amp rating)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWaterproof to IP67\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame interconnection height as Pro Installer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemovable knob allows isolation during servicing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 removable side plates for protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndustry standard 3.85 x 3.85 inch footprint\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSurface mount only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEach Pro Installer battery switch is fully tested for pressure sealing, \u003c\/li\u003e\n\u003cli\u003eRotation force and electrically load tested\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003eMounting: Surface Only\u003cbr\u003eVoltage: 48v DC (for 12-48v systems)\u003cbr\u003eRating: 400 Cont \/ 600 Inter \/ 1500 Crank\u003cbr\u003eDims: 3.85\" x 3.85\" x 3.62\"\u003cbr\u003eOperation: On\/Off\u003cbr\u003eStud: 4x 10 mm (3.8\") \u003cp\u003e\u003cimg src=\"%22https:\/\/productimageserver.com\/prop65\/6pt.png%22\" alt='\"Warning\"'\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"%22http:\/\/P65Warnings.ca.gov%22\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBEP PRO INSTALLER 400A EZMOUNT DOUBLE POLE BATTERY SWITCH\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBEP MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e770-DP-EZ\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e843687008569"}

BEP Pro Installer 400A EZ-Mount Double Pole Battery Switch - MC10

Product Description
Maximum quantity available reached.
Pro Installer 400A EZ-Mount Double Pole Battery Switch - MC10

An addition to our multi award winning Pro Installer EZ Mount range, this battery switch provides Double Pole On/Off functionality so that both positive and negative battery terminals can be isolated. Most commonly used on metal hulled craft, full isolation ensures there is no risk of stray currents that may cause galvanic corrosion, and also guarantees optimum safety during servicing or mishap, for example with mining equipment. As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze.

Features:
  • Tested to UL1107 ignition protection, CE
  • Tinned copper 10 mm (3/8 in) studs
  • Stainless steel washers and nuts
  • Fiber reinforced plastics
  • 400A Continuous / 600A 5 minutes Intermittent / 1500A 10 seconds Cranking
  • (cable size to achieve ratings 120mm}, 4/0, smaller cable size will reduce
  • the Amp rating)
  • Waterproof to IP67
  • Same interconnection height as Pro Installer
  • Removable knob allows isolation during servicing
  • 3 removable side plates for protection
  • Industry standard 3.85 x 3.85 inch footprint
  • Surface mount only
  • Each Pro Installer battery switch is fully tested for pressure sealing,
  • Rotation force and electrically load tested


Specifications
Mounting: Surface Only
Voltage: 48v DC (for 12-48v systems)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85" x 3.85" x 3.62"
Operation: On/Off
Stud: 4x 10 mm (3.8")

"Warning"WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.


Product : BEP PRO INSTALLER 400A EZMOUNT DOUBLE POLE BATTERY SWITCH
Manufacturer : BEP MARINE
Manufacturer Part No : 770-DP-EZ
UPC : 843687008569